lskreddy
06-10 11:37 PM
The worst hit 140's are EB3 (and that too mostly in NSC and some in TSC). Not a single NSC EB3-140 is coming at < 400 days.
EB2 is coming still okay and EB1/EB2-NIW are pretty quick. So i dont see a good quantity of benefit by allowing Premium Processing only on a thin section of applications ?? It make a difference of few days, not even months.
Where they need to re-instate Premium 140 to give actual relief - they wont do anything.
I agree, it is extremely narrow. Not too many employers wait until the 60 days window and if you had H1 approved, you would not qualify. I do believe this may be just to test waters and they will broaden it further..
EB2 is coming still okay and EB1/EB2-NIW are pretty quick. So i dont see a good quantity of benefit by allowing Premium Processing only on a thin section of applications ?? It make a difference of few days, not even months.
Where they need to re-instate Premium 140 to give actual relief - they wont do anything.
I agree, it is extremely narrow. Not too many employers wait until the 60 days window and if you had H1 approved, you would not qualify. I do believe this may be just to test waters and they will broaden it further..
wallpaper Bio-mechanical tattoo
chanduv23
10-23 07:50 PM
walking_dude, cagedcactus and bestin
you guys are a terrific trio
you guys are a terrific trio
saimrathi
07-03 11:20 AM
Well, here are the thoughts.
American Govt only listens when it sees an economic impact. Get thousands of such workers to not work a day, I am sure it would mean a huge economic impact. This is sending a signal that we dont tolerate this "pseudo-slavery" and that today we dont work a day but tomorrow we will be forced to leave this country (I know already several people who have done that and it is becoming more and more common for people to abstain from coming to this land of opportunity as the system is now less favorable)
If hundreds of thousands dont go to work, congress, corporates, press - the whole gamut would become sensitive to the issue. This is one way you can get them to lobby for our demands.
Taking out rally is also a very good way of doing it however if you did this in one place, the turnout will not be as impressive. Doing it in multiple cities needs an organization.
Bottomline, whatever you do, show solidarity, resolve, unity. That has never happened within this affected group of workers.
Sure, skip a day of work.. only to come back the next day and have two days worth of work lying on your desk, and one less vacation day...
American Govt only listens when it sees an economic impact. Get thousands of such workers to not work a day, I am sure it would mean a huge economic impact. This is sending a signal that we dont tolerate this "pseudo-slavery" and that today we dont work a day but tomorrow we will be forced to leave this country (I know already several people who have done that and it is becoming more and more common for people to abstain from coming to this land of opportunity as the system is now less favorable)
If hundreds of thousands dont go to work, congress, corporates, press - the whole gamut would become sensitive to the issue. This is one way you can get them to lobby for our demands.
Taking out rally is also a very good way of doing it however if you did this in one place, the turnout will not be as impressive. Doing it in multiple cities needs an organization.
Bottomline, whatever you do, show solidarity, resolve, unity. That has never happened within this affected group of workers.
Sure, skip a day of work.. only to come back the next day and have two days worth of work lying on your desk, and one less vacation day...
2011 iomechanical tattoos.
buehler
06-03 02:10 PM
sta�tis�tics (stə-tĭs'tĭks)
n.
(used with a sing. verb) The mathematics of the collection, organization, and interpretation of numerical data, especially the analysis of population characteristics by inference from sampling.
(used with a pl. verb) Numerical data.http://www.answers.com/statistics&r=67
I would be astounded if statistics is not considered a STEM major. The only way to know for sure beyond this forum is to check with a lawyer.
akred,
I am not refuting that statistics is a discipline within Mathematics. Just that that particular DOL web page doesn't give the list of disciplines considered as STEM.
n.
(used with a sing. verb) The mathematics of the collection, organization, and interpretation of numerical data, especially the analysis of population characteristics by inference from sampling.
(used with a pl. verb) Numerical data.http://www.answers.com/statistics&r=67
I would be astounded if statistics is not considered a STEM major. The only way to know for sure beyond this forum is to check with a lawyer.
akred,
I am not refuting that statistics is a discipline within Mathematics. Just that that particular DOL web page doesn't give the list of disciplines considered as STEM.
more...
Sakthisagar
10-20 12:55 PM
there is no need for pro-immigrant senator to respond becoz as soon as they respond..... it will increase the visibility and importance of grassley..... many a times in politics, the purpose of putting out provocative statement is to provoke a response..... to that effect, no response is the best response.... it is better for california director to respond & fight with a sitting senator, which de-values grassley's perceived seniority.....
That means let Immigrants suffer in hell. with this ignorant guy's letters, and inturn USCIS responds and issues a dump memo on that letter again, and the suffering becomes more and more day by day. Is the republicans have majority or Democrats I have doubts about that. This bipartisan is a key word to do nothing and enjoy all the benefits of being the ruling side. There is no seniority issue here. These senators are weeds who make immigrants life miserable.
That means let Immigrants suffer in hell. with this ignorant guy's letters, and inturn USCIS responds and issues a dump memo on that letter again, and the suffering becomes more and more day by day. Is the republicans have majority or Democrats I have doubts about that. This bipartisan is a key word to do nothing and enjoy all the benefits of being the ruling side. There is no seniority issue here. These senators are weeds who make immigrants life miserable.
amitjoey
02-12 03:09 PM
Thanks. All we need is 800 people like Hari, who can contribute a little amount of money and a little amount of time by inviting other friends.
Is it not true that it only takes about 10 minutes or so to invite other friends by mail to join IV and a $20/month.
Is it not true that it only takes about 10 minutes or so to invite other friends by mail to join IV and a $20/month.
more...
brad_sk2
09-26 12:30 PM
How long does it take to get EAD card by post after Finger printing is done?
I don't think both are related. Folks are getting EADs along with FP notices or receipts at TSC. Its just that NSC is slooow.
I don't think both are related. Folks are getting EADs along with FP notices or receipts at TSC. Its just that NSC is slooow.
2010 Biomechanical Tattoo
inspectorfox
07-22 09:20 PM
No big deal man...mine was approved in 2 days from NSC..;)
I think you guys just got lucky and should stop yapping!
There are many individuals who are stuck in Security/Background checks in the I-140 stage even with premium processing for almost a year.
I think you guys just got lucky and should stop yapping!
There are many individuals who are stuck in Security/Background checks in the I-140 stage even with premium processing for almost a year.
more...
crystal
09-14 03:39 PM
are we not aliens?
i hear as if some aliens are speaking .
i hear as if some aliens are speaking .
hair Biomechanical Tattoo Design
Motivated
10-27 09:22 AM
to Motivated...
Seriously, .... Are you really thinking about getting this guy :p
Good Job!
at least there is some action involved, you should join too....especially if you are from WI
just saying meragcdedobhai - won't get it.
Seriously, .... Are you really thinking about getting this guy :p
Good Job!
at least there is some action involved, you should join too....especially if you are from WI
just saying meragcdedobhai - won't get it.
more...
somegchuh
09-22 04:39 PM
Is it possible to include "allow filing 485" if labor has been pending for 2+ years?
Its not just people who have labor approved and are waiting for PD to be current. In fact there are a lot of ppl who are waiting for labor for 4+ years.
I think its perfectly doable. If its ok to ask for ability to file 485 without PD being current, I think its ok to ask for ability to file 485 while labor is pending.
But I guess we have gone thru this a dozen times and it doesn't appear that the plight of ppl stuck in PBEC is on IV agenda.
vivache:
Top on IV's goals is 'ability to file for I-485' even when visa number is not available. As you perhaps know this will enable securing an EAD. Hope this answers your question.
Its not just people who have labor approved and are waiting for PD to be current. In fact there are a lot of ppl who are waiting for labor for 4+ years.
I think its perfectly doable. If its ok to ask for ability to file 485 without PD being current, I think its ok to ask for ability to file 485 while labor is pending.
But I guess we have gone thru this a dozen times and it doesn't appear that the plight of ppl stuck in PBEC is on IV agenda.
vivache:
Top on IV's goals is 'ability to file for I-485' even when visa number is not available. As you perhaps know this will enable securing an EAD. Hope this answers your question.
hot A io-mechanical color sleeve
stirfries
12-01 06:28 PM
Hello,
My case is unique. We applied for our AP(for both myself and my spouse) through our Attorney on October 21st and the online case status for our AP petitions changed to,
"Document Production or Oath Ceremony" on November 16th.
Our case notes also said,
"On November 16, 2009 we mailed the document to the address we have on file. You should receive the new document within 30 days. If you do not, or if you move before you get it, call customer service at 1-800-375-5283".
It has been 12 Postal business days since the document was mailed out and our Attorney is yet to receive it.
Today I called up USCIS customer service enquiring about my petition. I was told by the CSR that, the "Document Production" doesn't necessarily mean that the document was sent out. It merely means that the Petition was approved and they have moved on to the next step of "Producing" / "Printing" the actual document and once it is produced/printed, it would be mailed out. She also asked me to call them back, 30 days after November 16th, if I still didn't receive the documents.
Whatever the CSR said, contradicts the case notes which clearly says, the Document was mailed out.
Any advises on what I should do?
I have an upcoming Travel by last week of December and I would really like to have my AP document on hand before I exit out of the the country.
Any clues or advises would be highly appreciated.
Thanks,
My case is unique. We applied for our AP(for both myself and my spouse) through our Attorney on October 21st and the online case status for our AP petitions changed to,
"Document Production or Oath Ceremony" on November 16th.
Our case notes also said,
"On November 16, 2009 we mailed the document to the address we have on file. You should receive the new document within 30 days. If you do not, or if you move before you get it, call customer service at 1-800-375-5283".
It has been 12 Postal business days since the document was mailed out and our Attorney is yet to receive it.
Today I called up USCIS customer service enquiring about my petition. I was told by the CSR that, the "Document Production" doesn't necessarily mean that the document was sent out. It merely means that the Petition was approved and they have moved on to the next step of "Producing" / "Printing" the actual document and once it is produced/printed, it would be mailed out. She also asked me to call them back, 30 days after November 16th, if I still didn't receive the documents.
Whatever the CSR said, contradicts the case notes which clearly says, the Document was mailed out.
Any advises on what I should do?
I have an upcoming Travel by last week of December and I would really like to have my AP document on hand before I exit out of the the country.
Any clues or advises would be highly appreciated.
Thanks,
more...
house Biomechanical Tattoo
lacrossegc
01-02 02:14 PM
By the looks of things as they are.....A very very long shot .... atleast 3-4 yrs to file I485.
Sit tight and best of luck
Sit tight and best of luck
tattoo Cool Biomechanical Tattoo
chanduv23
05-08 10:24 AM
There are situations when a h1b transfer or extension is granted but the approval notice does not have a i 94 atttachment that adjusts your extension to stay till the end of your petition date. In such a situation, the benificiary has to go to his home country for stamping and then come back.
The best thing you can do in your case is to approach murthy's firm and get a paid consultation.
The best thing you can do in your case is to approach murthy's firm and get a paid consultation.
more...
pictures dresses io iomechanical
Ramba
09-03 04:48 PM
You have two options. One is forget the current GC and take new job re-start your GC.
The second option is keep a copy of your I 140 approval. Join a new company. Re-Start the GC application. When the new labor is approved and lawyer is ready to ship the I 140 package to USCIS ask him to include the copy of Old I 140 approval notice in it with a cover letter to USCIS requesting porting the old priority date to your new application. ( I am not sure of job description in the 2 labors needs to be same/ similar for portablity. My guess is that it does not need to be strictly same but least in same field. Example IT to IT and not say IT to Finance or Healthcare etc)
The best bet is to take an appointment with a lawyer and go over it. Also talk to new companys immigration attorney if he will support this porting when the time comes.
Wrong information. In order to retain the PD from old 140 when filing new 140, the both jobs need not be in same/similar field. You are confused with AC21 job change. The first 140 job can be a "cook" in eb3, and the new 140 job can be "rocket scientist" in eb1.
The second option is keep a copy of your I 140 approval. Join a new company. Re-Start the GC application. When the new labor is approved and lawyer is ready to ship the I 140 package to USCIS ask him to include the copy of Old I 140 approval notice in it with a cover letter to USCIS requesting porting the old priority date to your new application. ( I am not sure of job description in the 2 labors needs to be same/ similar for portablity. My guess is that it does not need to be strictly same but least in same field. Example IT to IT and not say IT to Finance or Healthcare etc)
The best bet is to take an appointment with a lawyer and go over it. Also talk to new companys immigration attorney if he will support this porting when the time comes.
Wrong information. In order to retain the PD from old 140 when filing new 140, the both jobs need not be in same/similar field. You are confused with AC21 job change. The first 140 job can be a "cook" in eb3, and the new 140 job can be "rocket scientist" in eb1.
dresses io mechanical tattoos.
cheg
07-26 08:18 PM
EAD Benefits Thread
http://immigrationvoice.org/forum/showthread.php?t=10817
http://immigrationvoice.org/forum/showthread.php?t=10817
more...
makeup Biomechanical Tattoos
rb_248
03-31 08:54 PM
What about you? your PD is current right? any chance that you will get it soon?
Already got it....last September. Thanks for asking.
Already got it....last September. Thanks for asking.
girlfriend Anil Gupta Biomechanical
chakalov
09-19 07:40 PM
here is the deal:
if Durbin wants to pass the DREAM act he will need Cornyn support. If Cornyn wants to pass his SKILL act he will need Durbin support. Now we all know that on its own Cornyn will never support the DREAM act and Durbin will never support the SKILL bill. The question is will they be able to cut a deal and support each others bills. The answer is maybe. Note that about a month ago there was a vote on the SKILL bill and it didnt pass simply because no Democrat voted for it. It is not because no democrat supports the bill but because of partisan tactics. There was simply no bill on the Democrats side to offset the Cornyn amedment so they decided to bring it down. Now the sitiations is different. There is a Democratic bill that can make up for the SKILL bill. So if the DREAM act passes there is pretty good chance for the SKILL act will pass too.
if Durbin wants to pass the DREAM act he will need Cornyn support. If Cornyn wants to pass his SKILL act he will need Durbin support. Now we all know that on its own Cornyn will never support the DREAM act and Durbin will never support the SKILL bill. The question is will they be able to cut a deal and support each others bills. The answer is maybe. Note that about a month ago there was a vote on the SKILL bill and it didnt pass simply because no Democrat voted for it. It is not because no democrat supports the bill but because of partisan tactics. There was simply no bill on the Democrats side to offset the Cornyn amedment so they decided to bring it down. Now the sitiations is different. There is a Democratic bill that can make up for the SKILL bill. So if the DREAM act passes there is pretty good chance for the SKILL act will pass too.
hairstyles Biomechanical Tattoos
OlgaJ
February 20th, 2004, 07:25 AM
Don't you worry, Scott, my toes can take it. LOL!
Yes, you are right. I calculated that wrong. So let's see:
Assuming 12inch distance:
38mm (9.7) at f8, near 9.99, far 15
28mm (7.3) at f8, near 8.84, far 18.7
That does sound more reasonable given it's a digicam.
Olga
Yes, you are right. I calculated that wrong. So let's see:
Assuming 12inch distance:
38mm (9.7) at f8, near 9.99, far 15
28mm (7.3) at f8, near 8.84, far 18.7
That does sound more reasonable given it's a digicam.
Olga